Installing a Brick Paver Walkway or Face Bricks

Making use of Setting up a Brick Paver Walkway or Bricks Buy or Pavers to develop a sidewalk or outdoor patio complements a home in a way that is unmatched. It includes a level of quality and sophistication to a home entrance that can not be achieved with either concrete or asphalt. Brick and Pavers likewise can be found in numerous different colors and shapes enabling for distinct color design and patterns to be attained. In addition, setting up a Brick or Paver pathway does not necessarily need a pro. With some standard knowledge and a fairly basic walkway strategy, a house owner can undertaking such a task.

The key to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. In addition, string lines should be strung on each side of the pathway.
As soon as the area has actually been dug down, 3/4" gravel stone must be laid in and tamped down securely. Then 2" of sand, or stone dust must be topped the gravel. Again the sand/stone dust need to be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a stable base, put a 1" pipeline or journal board the length of the walkway on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the prepared area. These strips will act as your pathway border and aid to maintain the integrity and shape of the walkway. You can get these plastic strip borders at a lot of house enhancement shops. The strips must be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick more info to interlock them. This will once again help maintain the integrity of the pathway.

Undoubtedly bricks/pavers will need to be cut or divided when developing the pathway. To really cut/split the brick/paver, lay it in common bricks a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your walkway has curves you will need to buy/rent a wetsaw.

After installing the bricks, construct up the outside edges with extra sand, and after that shovel in the topsoil and pack down securely.
Spread stone dust over the brand-new walkway and sweep into the fractures. This will complete the interlocking of the bricks and help to get rid of any weed growth.


In addition, installing a Brick or Paver walkway does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. These strips will act as your walkway border and aid to preserve the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when constructing the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Face Bricks”

Leave a Reply

Gravatar